Working smoke alarms are required in every Victorian home. LC Electrical Services installs, replaces and tests hardwired smoke alarms for homeowners, landlords and businesses across Melbourne’s inner west.

Victorian smoke alarm rules

  • Homes built after 1 August 1997 must have hardwired smoke alarms with a battery backup
  • Homes built before that date can use battery-powered smoke alarms
  • A hardwired smoke alarm must be installed by a qualified electrician, although anyone can change a smoke alarm battery
  • Alarms must be on or near the ceiling of each storey
  • Rental providers must have smoke alarms tested at least once every 12 months, in line with the manufacturer’s instructions

Source: Consumer Affairs Victoria and local council building guidance. Check the expiry date printed on each alarm, as alarms do not last forever.

What we do

  • Install new hardwired smoke alarms
  • Replace faulty or expired alarms
  • Upgrade older battery alarms to hardwired alarms with battery backup
  • Interconnect alarms so they all sound together
  • Smoke alarm testing as part of our electrical compliance checks for rental properties

Where smoke alarms should go

At a minimum, there must be an alarm on or near the ceiling of each storey. In practice, the best position is usually in hallways between bedrooms and living areas, so the alarm can wake people who are asleep. We keep alarms away from kitchens and bathrooms where steam and cooking can set them off by mistake.

Smoke alarms for landlords

If you rent out a property, smoke alarms need to be tested at least once a year. We can test and replace alarms as part of a rental electrical compliance check, so both are covered in one visit.

Questions about this service

Does my home need hardwired smoke alarms?

If your home was built after 1 August 1997, yes. Hardwired alarms with a battery backup are required. Homes built before then can use battery alarms, although hardwired alarms are still a good upgrade.

Can I replace a hardwired smoke alarm myself?

No. A hardwired smoke alarm must be installed or replaced by a qualified electrician. Anyone can change the battery.

Why does my smoke alarm keep going off?

Common causes are steam or cooking smoke near the alarm, dust inside the unit, a low battery or an alarm that is past its expiry date. If it keeps happening, we can check the position and replace the alarm if needed.

Book smoke alarm installation

Call LC Electrical Services on 1300 327 953, email info@lcelectricalservices.com.au or send us an enquiry. We offer free onsite quotes in our local suburbs and every job comes with a 12-month warranty on labour.